Up

RAM
Stinson
Multifun
Extana
Toro 900
Vespid
SU29
Shinden
Northrop
Pogo
Mini Tornado
Toro 300
Direct
Roto
Hary
Foky
Trick 800
Trick 800 LITE
Trick 1000
Bendy 280
Bendy 400
Bendy Sport
Music Bubble
Big Bubble

Home
Slope models
Electric models
Accessories
E-Mail

  

Music BUBBLE is fully aerobatic model powered by electric motor.

The model is supposed to be flown by advanced flyers. It can be "hanged" vertically in the air (torque roll). The knife edge flight is surprisingly easy.

The model is excellent for 3D indoor flying and for aero musical.

 

The fuselage is designed so that you could use various types of motors and batteries.

In the following text variety of power units is suggested. We mention only those power units we have actually tested. Other suitable power units can be also used.

you will need:

  • RC set:

    • Transmitter: 4 channels.

    • Servos:  Hitec HS 50 or similar (5g)

    • Receiver: lightweight and small: JETI REX 5+, or similar.

  • Motor: AC 25-45g

  • Accu : LiPol  20-50g.

  • Tools you will need: modeling knife, pistol type soldering iron, sealing iron, pliers, steel rule, scissors.

  • Glue, etc.: 5-30 minutes epoxy, medium cyanoacrylate glue styro and standard (CA), connectors to attach the battery to the controller.

Power unit

  • Motor PJS 300SF

  • Propeller GWS 8/4,3

  • Battery 3 cells Li Pol 340 - 700mAh

  • Controller any type for at least 7 Amps current. (TMM 0710 3L)

 

  • Motor PJS 300SFR

  • Propeller GWS 10/4,7 - 6

  • Battery 2 cells Li Pol 340 - 700mAh

  • Controller any type for at least 7 Amps current. (TMM 0710 3L)

 

  • Motor AXI 2208/26

  • Propeller GWS 9-10/4,7

  • Battery 2 cells Li Pol 700mAh

  • Controller any type for at least 7 Amps current. (TMM 0710 3L)

 

LIST OF PARTS

  • 1X wing

  • 2X wing reinforcement - servo fixing

  • 2X zaslepení køídla

  • 2X aileron

  • 2X pushrod

  • 1X fuselage (2 parts)

  • 1X canopy

  • 1X front fuselage reinforcement (EPP)

  • 1X tail skid

  • 2X carbon pushrod (rudder 342mm, elevator 316mm)

  • 4X clevis

  • 4X horn (aileron 08,mm)

  • 1X fixing for pushrod and LG wheels (plastic tube)

  • 1X motor mount PJS (glass fiber))

  • 1X motor mount UNI (glass fiber))

  • 1X landing gear (LG)

  • 2X LG wheel

  • 1X LG mount reinforcement (glass fiber)

  • 2X LG mount reinforcement (plastic)

  • 1X rudder

  • 2X hinge-rudder

  • 1X elevator (2 parts)

  • 3X hinge - elevator

  • 1X elevator joiner (ply)

  • 1X sticker

  • 1X instructions

 

 

Back Home Up Next