Are you unhappy and nervous when flying a slick, polished model, always scared you may crash it? Do you just need to let the steam out and have an easy, pleasant fun?

Two models with an AC motor now cost as much as one unequipped model.

Just a quick decision is needed and you may order here: telink@volny.cz

You do not like being afraid of crashing your new, shiny model. You need to let the steam out in the first place! You apparently need a company of similarly bent friends. And you need to fly with them and to beat them in the air every so often.

We have brought you the tool - enters the RAM,

Now you hold a simple, cheap model slated especially for combat with the streamer.

The model excels with its pleasant flight characteristics. It could be flown most anywhere and thanks to its airframe made of sturdy expanded polypropylene (EPP) it is almost indestructible.

Its building and installation of the RC set is so simple that most everybody will make it.

you will need

• Transmitter - three-channel one with the delta mixer (you can also use a mixer in the model)

• Servos - 2 pcs                     e.g. HS 55 (9 g)

• Receiver -                            e.g. Jeti Rex 5 MPD (8 g)

• Motor - Brushless             e.g. Axi 2208/26 (40-50 g)

• Controller -                          for a minimum of 12 Amps current, e.g.. Jeti, MGM......

• Accumulator battery -      2 pcs LiPol 800-1500mAh (70-90 g)

• Propeller -                            7- 8/6

 A list of other necessary material: epoxy glue, medium thick cyanoacrylate glue (we recommend the proven Flash brand), accumulator battery connectors.

A list of necessary tools: modelling knife, pliers....

terms used

Elevon - Tailless aircraft control surface, combining the function of aileron and elevator.

Fin - fixed vertical aerodynamic surface affecting directional behaviour

"Pull" - pull the left control stick back, both elevons move up together

"Push" - push the left control stick forward, both elevons move down together.

"Right bank" - Move the right stick to the right, the starboard elevon moves up, the left one down.

"Left bank" - Move the right stick to left, right elevon moves down, the left one up.

List of parts in the kit:

• 1x wing of EPP

• 1x fuselage pod of EPP

• 2x vertical fin of EPP

• 1x motor bearer plate

• 2x control rod

• 2 x control rood 0,8mm/80mm

• 1 x securing of the control rods (tube

• 1x string (fuselage and wing stiffening)